Current position > Product detail
『Digital Flow Meter for Water: Smart LCD Electronic Pipe Monitoring Systems』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)
Digital Flow Meter for Water: Smart LCD Electronic Pipe Monitoring Systems
Quick Answer
Silver Instruments supplies electromagnetic digital flow meters with a smart LCD display that show real‑time flow rate, total volume, and diagnostic data directly on the pipe. These meters handle clean water, wastewater, seawater, and water‑glycol mixtures from DN15 to DN2000. Output choices include 4‑20 mA, pulse, RS485 Modbus, and HART, which connect easily to PLC, SCADA, or cloud monitoring.
Most engineers pick the SEFM series when they need a no‑moving‑part meter that does not clog and delivers ±0.5% reading accuracy year after year.
What Makes an LCD Flow Meter “Smart” for Pipe Monitoring
A digital flow meter for water does more than count liters. The built‑in LCD on today's electromagnetic meters shows instant flow (m³/h), forward and reverse totalisers, empty pipe alarms, and electrode coating warnings. Some models log 30 days of trend data you can scroll through with the magnetic keypad. Because the display is local, operators walking the pipe gallery can spot a low‑flow event long before the DCS alarms.
Silver Instruments ships SEFM meters with a backlit LCD that stays readable in direct sun or in a dark pump pit. The screen rotates 90° so you can read it on a vertical or horizontal pipe run. In practice, plant electricians in Indonesia and Nigeria tell us the quick‑access diagnostic screen cuts their troubleshooting time in half.
SEFM Series: Specific Numbers Your Procurement Team Needs
The SEFM electromagnetic flow meter is our most specified water meter across Southeast Asia, Oceania, and the Middle East. Here is what you get on a standard unit:
Pipe sizes DN15, DN25, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200, DN1400, DN1600, DN1800, DN2000.
Liner choices Hard rubber (potable water, up to 80°C), PTFE (aggressive chemicals, 120°C), polyurethane (slurry, seawater).
Electrode materials 316L stainless for most water jobs, Hastelloy C for brackish or seawater, titanium for high‑chloride desalination brine, tantalum for acidic wastewater.
Accuracy ±0.5% of reading for flow velocity above 0.5 m/s, optional ±0.2% with field calibration.
Power supply 220 V AC, 24 V DC, or battery‑powered remote versions for isolated boreholes.
Ingress protection IP68 sensor standard on DN50–DN300, IP65 on the converter housing.
Outputs 4‑20 mA, pulse, frequency, RS485 Modbus RTU, HART protocol, and dry contact alarms. All signals arrive on one terminal block inside the converter.
We laser‑etch the tag number onto the stainless steel ID plate for free when you give us the asset code at order stage.
Four Industries Where the LCD Saves Real Money
Municipal water supply in Vietnam and the Philippines uses the SEFM on DN400 and DN600 transmission mains. The local LCD totaliser lets the operator verify weekly consumption without opening a SCADA screen. One Ho Chi Minh City water company reduced billing disputes by 12 percent after they replaced mechanical meters with SEFM units.
Seawater desalination plants in Saudi Arabia and Australia run the meter on brine reject lines and intake pipes. Titanium electrodes and polyurethane liner hold up at 45 000 µS/cm
_600x400.jpg)
Food and beverage factories in Thailand and Brazil use sanitary‑connection SEFM meters with PTFE liner for CIP water and syrup blending. The batch totaliser on the LCD resets after each mix, so the operator does not need a separate batch controller.
Wastewater treatment sites in Kenya and Mexico install the meter on open‑channel inlet lines and sludge return pipes. Because the sensor has no moving parts, rags and grit pass straight through. An empty‑pipe alarm on the LCD tells the operator the pump lost prime before the blower over‑heats.
Installation and Startup: What Most Sites Get Wrong
The SEFM needs 5 DN straight pipe upstream and 3 DN downstream. We see many installations where a partially opened butterfly valve 20 cm from the sensor kills accuracy. Our application engineers review your pipe layout drawing before quoting. Send us a photo of the pipe run and we mark the best sensor location.
For buried lines, the IP68 sensor can sit in a flooded chamber indefinitely. The cable between sensor and converter extends up to 100 meters with no signal loss when you use our shielded twin‑axial cable. In practice, a water utility in Queensland buried ten SEFM sensors under a bike path and mounted the converters in a roadside cabinet. They read flow from the LCD window twice a week, no trench entry needed.
FAQ
Can the digital flow meter run on battery power for remote sites?
Yes. Silver Instruments supplies a battery‑powered converter that runs for three years on two D‑cell lithium packs. The LCD shows remaining battery life alongside flow data. We have these installed on irrigation boreholes in outback Australia and northern Ghana.
What is the minimum conductivity the meter needs?
The SEFM requires a minimum fluid conductivity of 5 µS/cm. Deionised water and pure condensate need a different technology. Talk to us about ultrasonic or Coriolis meters for those applications.
Does the LCD display work in bright sunlight?
The transflective backlit LCD is readable in direct desert sun. We test this at customer sites in Oman and Mauritania. In a dark pump room, the backlight turns on automatically when you approach the sensor.
Can I get the meter with a data logger inside?
Standard SEFM converters store 30 days of flow history (hourly averages) and event logs. A 128 MB SD card version stores four years of data. You can pull the CSV files via USB or RS485 without proprietary software.
What pipe standards does the meter fit?
The flanged version matches ANSI 150 lb, PN10, PN16, PN25, JIS 10K, and AS 2129 Table E. Wafer styles fit between PN16 flanges from DN25 to DN150. Give us your pipe standard and we ship the meter with the correct flange drilling.
Send us your pipe size (DN), water quality (µS/cm if known), pressure (bar), and temperature (°C). We reply within one working day with a dimensional drawing, a price in USD, and the nearest distributor if you prefer local stock. Email [email protected], call +86‑25‑68650347, or WhatsApp +86‑25‑52155837. WeChat users reach us at +86 13512131526. Ask for the SEFM electromagnetic flow meter for water and get a quote tailored to your site.