How much does an electromagnetic flowmeter cost per unit

『How much does an electromagnetic flowmeter cost per unit』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)

How much does an electromagnetic flowmeter cost?

1. The price of the spare part of the imported Wei Ran Yu Sheng type electromagnetic imitation flowmeter is about 40000 yuan, while the price of the model connected with a regular flange is about 30000 yuan.

2. Domestic electromagnetic flowmeters, if connected with a regular water flange, have a price range from 2000 yuan to 20000 yuan.

3. The parameter information you provided is insufficient to provide an accurate quotation.

2. What is the price of an electromagnetic flowmeter? The price of electromagnetic flowmeter products is determined by a comprehensive selection of factors such as caliber, lining material, electrode material, pressure, output requirements, etc. Different parameters have different prices. So I can only give you a rough range, generally the cheapest ones are around 2000 yuan. Electromagnetic flow meters priced below 2000 yuan are either made by manufacturers or cut corners. I can analyze the cost for you here. Generally, an electromagnetic flowmeter is divided into two parts: one is the sensor (measuring tube) part, and the other is the converter (meter head) part.

(1) Converter (commonly known as header) The converter part is divided into two major categories in the market, one is the converter purchased from Lanshen, and the other is the self-developed converter. Among them, Lanshen only produces converters and does not produce whole meters, so many small factories and OEM factories buy their converters and sell them after installing sensors. It is precisely because

Lanshen converters flood the market that malicious competition in the industry has led to repeatedly lowering product prices, ultimately putting pressure on Lanshen itself. In response to the downward trend in market prices, Lanshen is forced to compress its costs, and the direct problem caused by cost compression is the decline in converter performance. Previously, Lanshens meter heads could be sold for more than 2000 yuan when they were expensive, but now they are only about 600 yuan. Due to the significant cost reduction efforts and insufficient technical capabilities, Lanshen has faced many problems in recent years that have not been effectively resolved, resulting in a deteriorating market evaluation of Lanshen. In addition to the manufacturers who purchased Lanshen headers mentioned above, several other companies that have mastered key technologies have developed their own converter headers. Due to their self-produced and self sold products, although the price and cost are not lower than Lanshen, their performance and problem-solving are much better than Lanshens. The average cost of the converter section is approximately between 600-800.

(2) The sensor part consists of a measuring tube, lining, electrode, coil, etc. The measuring tube is generally made of 304 stainless steel, and the amount of material used varies depending on the diameter. The larger the diameter and the greater the pressure, the higher the material cost required for the measuring tube. Due to the relatively fixed cost of converters, some low-cost manufacturers may save costs on measuring tubes by reducing their thickness or downshifting their materials. Such products are unreliable. The lining and electrode materials are selected accordi

『SILVER Official Website SERVICE』