Current position > Product detail
『TSI Flow Meter: Laboratory Grade High-Performance Gas Calibration Tools』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)
TSI Flow Meter: Laboratory Grade High-Performance Gas Calibration Tools
Quick Answer: TSI flow meters are laboratory-grade instruments built for high-accuracy gas calibration and validation. They deliver measurement uncertainty below 0.25 % of reading and are trusted by metrology labs, filter test benches, and burner R&D centers worldwide. Silver Automation Instruments supplies the full range of TSI mass flow meters and ships globally from stock with traceable calibration data.
When a process flow meter is not enough
Field instruments like electromagnetic or Coriolis flow meters handle production lines. But inside a calibration laboratory, the reference device needs another level of precision. TSI flow meters sit exactly at this point. They measure clean dry gas at ambient conditions and serve as the gold reference for other meters.
Many engineers first see TSI devices in ISO 17025 accredited labs. The meters use a laminar flow element combined with a highly stable differential pressure sensor. Temperature and absolute pressure compensation happen in real time through built-in PT100 probes and solid-state transducers. Because of this architecture, a TSI gas flow meter stays linear across its full range without the drift you would expect from a thermal mass device.
Which TSI models we handle most often
At Silver Automation Instruments we stock and ship three core families. The TSI 4040 is the general-purpose workhorse. It covers 0 to 300 L/min, delivers 0.25 % of reading accuracy, and runs on battery or mains power. Engineers use it for fume hood testing, blower door calibration, and general mass flow verification.
The TSI 4140 and 4143 are the low-flow specialists. Models span 0 to 20 L/min with resolution down to 0.001 L/min. A customer in Vietnam who manufactures automotive air filters put two TSI 4143 units into service last year. He needed to validate a new filter test rig at 2.5 L/min, 5.0 L/min, and 10.0 L/min set points. We pre-configured both meters for dry air, shipped them to Ho Chi Minh City, and they passed an on-site audit within the first week.
For sub-1 L/min flows, the TSI 4000 series with a capillary sensor gives repeatability better than 0.1 %. Biogas analyser labs and respiratory device manufacturers select this version most of the time.
Here is a practical detail a lot of spec sheets skip. All TSI meters output 0 to 10 V DC and RS232 as standard. You can push data into a PLC, a paperless recorder, or a calibration software suite without extra converter boxes. Silver Instruments also supplies the compatible USB adapter for customers who prefer direct PC logging.
Real accuracy numbers you can rely on
We see too many quotes that list accuracy without stating the reference conditions. TSI defines it clearly. A model 4040 reads air flow with an accuracy of 0.25 % of reading plus 0.02 % of full scale after a 1-minute warm-up. That applies across 15 to 30 deg C ambient. The built-in temperature sensor corrects to standard conditions of 21.1 deg C and 101.3 kPa. So when you measure 150.0 L/min, the true value sits inside 149.4 to 150.6 L/min. This level of certainty is what a calibration laboratory needs when writing an ISO 17025 scope.
Field instruments rarely match that. A good vortex meter may hit 0.75 % of reading on gas. Compared against the TSI reference, the field meter often shows a small offset at the low end. Most calibration routines on our customer sites use the TSI as the master, then apply a correction curve to the process device. It works every time.
Connecting TSI tools to your existing lab setup
Basic operation does not require a computer. The front panel displays flow rate, temperature, and pressure simultaneously. You can select mL/min, L/min, or standard cubic centimetres per minute. Engineers who calibrate thermal
If your quality system demands digital traceability, the RS232 port streams data in real time. We have supplied TSI data cables together with Silver Instruments paperless recorders for dairy research labs in Argentina. The combination gave them a tamper-proof record of every calibration run logged with date, time, and operator ID.
One thing we learned from field support calls. In humid tropical environments, a small inline desiccant cartridge on the gas inlet protects the laminar element from condensation damage. We ship a compatible desiccant kit with every TSI order to Southeast Asia and the Middle East by default. It costs very little and prevents a lot of headaches.
How Silver Instruments fits into your procurement
We are not an anonymous e-commerce listing. Silver Automation Instruments holds physical stock of TSI mass flow meters in our Nanjing warehouse. Before any unit leaves our quality centre, we run a point-by-point check against a factory-calibrated Coriolis master reference. That gives our customers an extra layer of confidence beyond the manufacturer credential.
Our order process is simple. Send us your gas type, full flow range, operating pressure, ambient temperature range, and the fitting size you need. We typically ship to Dubai, Sao Paulo, Lagos, or Surabaya within three working days after payment confirmation. You receive the TSI flow meter, the calibration certificate, a hard copy of the user manual, and our after-sales direct line on WhatsApp.
Request a TSI flow meter quote now. Contact Silver Instruments at [email protected] or call +86-135-1213-1526. You can also reach us via WhatsApp at 86-135-12131526 or WeChat ID +86 13512131526. Include your flow points in L/min and the gas composition for a same-day technical offer.
Frequently Asked Questions
What is the difference between TSI 4040 and TSI 4140 flow meters?
The 4040 covers 0 to 300 L/min and is built for general laboratory calibration tasks. The 4140 targets low-flow applications up to 20 L/min with higher resolution. Choose the 4040 for duct leakage tests or fume hood certification. Choose the 4140 when you validate mass flow controllers under 5 L/min.
Can I use a TSI flow meter with natural gas or biogas?
Standard TSI meters are rated for clean dry non-condensing gases. They work with air, nitrogen, helium, and argon. For biogas or natural gas with moisture and trace H2S, you will need a sample conditioning system upstream. Silver Instruments can supply a complete sample probe and chiller package for these applications.
Does Silver Automation Instruments provide ISO 17025 calibration certificates?
We provide factory traceable certificates with each TSI unit. If your lab requires an accredited ISO 17025 certificate, we can arrange third-party calibration through a partner metrology institute. Mention this requirement in your inquiry and we will include the lead time and cost in the quotation.
Which TSI model is best for calibrating a Coriolis flow meter on nitrogen?
Most Coriolis meters for industrial gas measurement need a reference flow between 50 and 250 L/min. The TSI 4040 fits this range well. For very small Coriolis meters like a DN15 unit running at 3 L/min, the TSI 4143 gives better accuracy at the low end.
How fast can Silver Instruments ship a TSI flow meter to Saudi Arabia or Nigeria?
We keep TSI 4040 and 4143 models on the shelf in Nanjing. To Dammam or Jeddah, air freight typically takes 4 to 5 working days. To Lagos, air shipments arrive within 5 to 7 working days. We can also use your forwarder account if you prefer to consolidate freight.